Loft InsulationInstallers

Thermal imaging survey in Burgess Hill

Looking for a thermal imaging survey in Burgess Hill? We cover Burgess Hill and the rest of West Sussex, with a visit that is priced before you book.

That includes addresses in RH15, BN6 and RH16. The local authority is West Sussex.

Guide price £165 to £295 Burgess Hill, West Sussex
A thermal imaging camera pointed at a ceiling

Where we work around Burgess Hill

Burgess Hill sits about 11 miles from Crawley, measured in a straight line.

We work in neighbouring Haywards Heath, Shoreham-by-Sea, Crawley and Horsham too.

Postcode districtsRH15, BN6, RH16
Council areaWest Sussex
County or areaWest Sussex

What is a thermal imaging survey?

Thermal images work best when the house is heated and the outdoor temperature is low, ideally at least 10°C lower than indoors, so surveys are booked for cold mornings or evenings. We image the top-floor ceilings, the room-in-roof if you have one and the loft, and explain what each cold patch is likely to be. More about a thermal imaging survey.

  • Infrared images of ceilings and the roof
  • Annotated report
  • Recommendations, with prices if asked

Why book with us in Burgess Hill

Fixed written price

The price on the quote is the price you pay. It only changes if you change the job, or if we find something hidden, such as rot, and you agree the change in writing first.

Clear contact details

Your quote says who to call with questions before, during and after the work.

No pressure selling

You get everything in writing and decide in your own time.

Written findings

You get photos and a plain list of what we found and what we would do about it.

How much does a thermal imaging survey cost in Burgess Hill?

£165 to £295Survey and report for a typical house. Priced before you book, with written findings afterwards.

This work is not an energy-saving material for VAT, so it is standard-rated if VAT applies. Where it is done alongside insulation, the quote shows each part separately.

Work out a guide price for your loft

Building regulations in England

In England, a loft insulated across more than half its area should reach a U-value of 0.16 W/m²K. Insulation alone is not usually notified to building control. How the rules work across the UK.

Questions about a thermal imaging survey in Burgess Hill

Can you visit Burgess Hill outside working hours?

Ask about early, late or weekend appointments when you get in touch, and we will tell you honestly what we can offer.

Do you charge extra to travel to Burgess Hill?

Not normally. Our guide prices include normal travel to Burgess Hill. If an address needs a ferry or an unusually long journey, we tell you the cost before you book.

Do you cover all of RH15?

Yes, we cover the RH15 postcode district and the districts around Burgess Hill.

Is a thermal imaging survey worth it?

It is most useful where a problem is hard to find or you want to check someone else's work. For a simple loft you can see into, a standard survey is usually enough.

When is the best time for a thermal imaging survey?

On a cold, still, dry day with the heating on for several hours. Bright sun or rain on the roof makes outside images unreliable.

Thermal imaging survey in other towns

Other loft work in Burgess Hill

Find out what your loft needs

Free survey and a fixed written quote for installation work. Guide prices first if you prefer.